Today I’m going to show you how to make something you probably use every day. The Swiffer dusters are so handy to have around the house for easy cleaning and dusting. However, it can get costly to keep having to buy the refills for them. But what if I told you that you can make a reusable one? I’m going to show you these DIY Swiffer Duster – Make Your Own Reusable Dusters! It is a pretty easy sewing project too. If you are just starting out on your sewing journey, this is a great project to make. Sew up a few of these so you can have one on the duster and then have another that can be tossed in the wash and then swap them as needed. As for the fabric needed for this sewing project, it works best if you use something like flannel or fleece. That is because both of those grab and hold on to the dust better than say a board cloth. Terry cloth will also work but it sometimes leaves behind more little fabric particles as we will have raw edges on this duster. I’ll leave that choice up to you. Whatever you decide on, you’ll need about half of a yard.

Once you have your fabric picked out, you’ll only need a few basic sewing supplies. You will need some thread to match your fabric, some pins or clips, some fabric scissors or a rotary cutter, mat, ruler, and a fabric marker. Gather up your supplies from the list below and let’s get started! Make sure you check out our sewing project on how to make your own reusable Swiffer pads that way you will have the complete package to dust and sweep your floors clean with reusable products.

What You’ll Need:

DIY Reusable Swiffer Duster

DIY Swiffer Duster

The first step in this diy swiffer duster sewing tutorial is wash, dry, and iron your fabric. This acts as a preshrink for your fabric so that your stitches do not pull out the first time you wash your duster. One of my favorite parts of this project is that you can reuse this again and again, so take the time to prepare the fabric beforehand and it will serve you in the long run. Next you need to cut out your fabric according to the cut list below. You will need two of each size:

(2) 7″x7″
(2) 6″x7″
(2) 4″x7″
2) 3″x7″

Your pieces should look like this when you are finished.

Next, we will mark the lines for our DIY swiffer duster handle to go. This project doesn’t require much precision, other than this 3/4 inch pocket you are making for the handle. To make it, fold a 7×7 inch piece in half length-wise and mark the center of the fold to find the center. Then on each side of that center mark measure out 3/4 inch and mark it. Do it at both ends and then make a line for those 3/4 marks on both pieces.

Layer pieces right sides out and clip in place.

Lay the 7″x7″ pieces on top of each other with the right sides facing out. Clip or pin them together.

Now on this diy duster tutorial, it’s time to sew! Head over to your sewing machine and sew those two pieces together on each of those lines. Make sure to do a backstitch at the start and finish.

Layer pieces on top of each other and pin to create duster surface

Now on this duster sewing tutorial, we will layer our fabric pieces. Lay a piece of the 3″x7″ piece down, then lay a 4″x7″ on top of that one making sure to line up that centerline. Then lay a 6″x7″ on top of that one then the 7″x7″ pieces. Make sure to keep everything centered. Lastly, lay the other 6″x7″, 4″x7″ and 3″x7″. Clip or pin everything in place.

Head back to your sewing machine and sew them all together by sewing down that centerline. Do a backstitch at the start and finish. You can either eye the center line and sew or make a line with the pen if you need to.

use scissors to make the fringes in your duster

Now that you are finished sewing, the last thing you need to do to make this duster is to make the fringes. This will help the duster pick up dirt and dust on all kinds of surfaces and in all the nooks and cracks. Use the scissors to cut the edges about 1/4 to 1/2 an inch apart and all the way to the stitching. Make sure to do not cut the stitching.

And that’s it! Now you know how to make this swiffer duster! Slide the cover onto the duster by placing the handle in the pieces with the 3/4 inch from center stitches. This is one sewing craft where it really does not matter if things are slightly off. The main thing to make sure you have right on is the 3/4 inch from center stitches as this is where the duster handle will slide in. Make your own reusable duster and save yourself some money. I admit this project has helped me dust more regularly around my home and I can tell the difference in my allergies. I hope this little project helps you as much as it did me!

If you liked learning how to to make this diy swiffer duster – make your own reusable dusters tutorial, make sure to pin it to your favorite Pinterest board or share it with friends on social media. If you decide to make this simple project on your own, make certain that you take a picture afterward and tag us on social media as we love seeing the fabrics and color choices that people use!

Yield: 1

DIY Swiffer Duster - Make Your Own Reusable Dusters!

Keep your home looking great with this simple diy swiffer duster. Easy to make and will save you money! Plus you will duster more often not having to buy new dusters each time.

Active Time 20 minutes

Total Time 20 minutes

Difficulty Easy

Estimated Cost $2.00

Materials

Tools

Instructions

First you need to cut all the pieces of fabric that will be needed. You will need two of each size. (2) 7"x7" (2) 6"x7" (2) 4"x7" (2) 3"x7"
Fold a 7x7 inch piece in half length-wise and mark the center of the fold to find the center. Then on each side of that center mark measure out 3/4 inch and mark it. Do it at both ends and then make a line for those 3/4 marks.
Lay the 7"x7" pieces on top of each other with the right sides facing out. Clip or pin them together.
Sew those two pieces together on each of those lines. Make sure to do a backstitch at the start and finish.
Lay a piece of the 3"x7" piece down, then lay a 4"x7" on top of that one making sure to line up that centerline. Then lay a 6"x7" on top of that one then the 7"x7" pieces. Make sure to keep everything centered. Last lay the other 6"x7", 4"x7" and 3"x7". Clip or pin everything in place.
Sew them all together by sewing down that centerline. Do a backstitch at the start and finish. You can either eye the center line and sew or make a line with the pen if you need to.
The last thing you need to do to make this duster is to make the fringes. Use the scissors to cut the edges about 1/4 to 1/2 an inch apart and all the way to the stitching. Make sure to do not cut the stitching.
Slide the cover onto the duster by placing the handle in the pieces with the 3/4 inch from center stitches.

Recommended Products

As an Amazon Associate and member of other affiliate programs, I earn from qualifying purchases.